EKS110

• Capacity 2200 lbs

• 3-phase AC technology drive system (24 volts) for greater torque and dynamic movement

• Ergonomic workcentre for outstanding handling

• Outstanding efficiency: high stockpicking performance levels with low energy consumption

• Optionally available with walk-on load section (L) or auxiliary lift (Z)

The EKS 110 is the ideal truck for stockpicking between the first and third levels. Boths the platform and the load section can be raised up to a height of 118 inches or 14.8 feet, with stockpicking up to 178 inches or 9.8 feet.

The cantilever design allows a wide range of load storage units to be raised off the ground both longitudinally and crosswise. The load section is available in a walk-on design (option) with a protection device or with auxiliary lift without reducing the residual capacity. This ensures picked goods can be stored at an accessible height.

Other ergonomic and technical innovations are included to make stockpicking faster, easier and above all more economical:
 

• Large storage areas on the battery cover and below the control unit.

• Extended operator platform width (optional).

• Sensitive speed control.

• Individual travel programs.

• Clearly defined driver's display.

• Threephase drive system (24 volts).

Back To Jungheinrich Products

Back To Top

 EKS310

• Capacity 2200 lbs

• 48 V 3-phase Jungheinrich's proprietary AC technology for high performance and productivity

• Excellent economic efficiency through energy reclamation

• Excellent reliability throughJungheinrich's proprietary AC drive control and CAN-Bus

• Optimised operator control through modular workplace concept

• Broad application spectrum through walk-on load section or additional lift

The EKS 310 range order picker with 48 V 3-phase Jungheinrich proprietary AC technology, 2200 lbs capacity as well as order picking heights up to 34 feet. Designed for the medium performance segment, for picking single articles from the racking. Its compactness provides maximum maneuverability. The opportunity to ergonomically optimize from a walk-on load section or via an additional lift increases both flexibility and economic efficiency. This high efficiency is available to the operator for effortless operation: The clearly arranged cab provides a generously dimensioned workplace. Large depositing areas, clear contours and the choice of various operating directions make working significantly more pleasant and consequently faster. At the centre of the effective operating concept is the two-piece operating console and the large display. With a number of innovative performance characteristics, they define technologically advanced system ergonomics:
 

 

• Operating arrangement in the drive direction, the load direction, both or diagonal.

• Information transmission via graphic display. Important operating data is quickly and legibly displayed in pictograms.

• Individually adjustable steering characteristics and degree of steering lock.

• Travel control via thumb movement on multi-function lever for safe hold during acceleration and braking.

• Two-handed operating concept for first class safety and operating comfort. Switch-free sensors register the operator's touch and pass this information to the onboard computer where all safetyrelevant checks are carried out.

Back To Jungheinrich Products

Back To Top

EKS314

• Capacity 3000 lbs

• 48V 3-phase AC technology for high torques, dynamic movement and excellent reliability

• Energy regeneration during braking

• Energy reclamation during lowering

• Optimum visibility in both drive and load direction

• Electrically powered pallet clamp

The order picker EKS 314 with 48 V 3-phase AC technology, 3000 lb capacity and picking height up to 32 feet means high performance in the high-rack warehouse. The large cushioned stand-on platform increases reach and flexibility when order picking individual items from the racking.

Operator efficiency is increased by ease of operation of the clearly arranged controls and spacious cab. Large depositing areas and functional ergonomic design help the operator work more efficiently and consequently faster.

The operating console has a large display surface so it can be read at a glance. Many operator functions can be done with just one hand due to a number of innovative motion controls, they define the latest in intuitive system ergonomics:
 

• With a large graphic display, important operating data are quickly and legibly displayed in pictograms.

• Individually adjustable travel programs for comfortable and precise travel speed control.

• Steering characteristics and transmission ratio of the steering disk are individually adjustable.

• Travel control requires only a easy thumb movement on the multi-function lever for safe grip during acceleration and braking.

Back To Jungheinrich Products

Back To Top